CREATIVE 4X CD-ROM Drives GCD-R542B - Manual (Page 16)

Setting Up Your CD-ROM Drive 2-1
2
Setting Up Your CD-ROM Drive
This chapter provides you with instructions to set up your CD-ROM
drive. These instructions work:
❑ If you have purchased your CD-ROM drive as a stand-alone
product or in a multimedia upgrade kit.
❑ If you have purchased your CD-ROM drive with a CD-ROM
interface card.
If you are new to CD-ROM drives, we recommend that you
read Chapter 1 before attempting to set up your drive.
Besides the CD-ROM drive, get the following items ready before
setting up your drive (see Figure 2-1):
We recommend you to use a Philip Number One screwdriver as
it is applicable to most systems. To avoid any damage to your
drive, fasten the drive to your system using the screws
(M3x5mm) provided.
Figure 2-1: Items required for setting up your CD-ROM drive.