CREATIVE 4X CD-ROM Drives GCD-R542B - Manual (Page 13)

Knowing Your CD-ROM Drive 1-4
When placing the disc onto the tray, hold the disc by the inner and
outer edges with the disc label facing up as shown in Figure 1-2.
The disc tray can be locked using the LOCKCD.EXE utility
(see the section “Locking the Disc Tray” in Chapter 4).
When there is a power or system failure, you can eject the disc tray by
inserting a straightened paper clip into the Eject Hole and push hard
(see Figure 1-3). Pull the ejected tray out gently as shown in
Figure 1-4.
Figure 1-2: Holding a disc.
Figure 1-3: Inserting the straightened paper clip to eject the tray.