FRITSCH ANALYSETTE 18 - Manual (Page 30)

7 Maintenance
DANGER!
Mains voltage
– Before beginning with maintenance work, unplug the
mains plug and protect the device against being unin-
tentionally switched back on again!
– Indicate maintenance work with warning signs.
– Maintenance work may only be performed by special-
ised personnel.
– Put safety equipment back into operation after mainte-
nance or repair work.
DANGER!
Note that the sieve shaker must be repaired, maintained
and inspected exclusively by a qualified electrician in
accordance with national regulations (e.g. VBG 4) because
improper repairs can lead to significant dangers for the
user.
We recommend keeping a safety logbook Ä Chapter 11
‘Safety logbook’ on page 37, where all work (maintenance,
repairs......) performed on the device is entered.
– The most important element of maintenance is regular
cleaning:
– When cleaning the complete device, adhere to the
guidelines of the Accident Prevention Regulation (BGV
A3) ‐ especially if the device has been set up in a dusty
environment or if the processed source material pro‐
duces dust.
Maintenance
- 30 -