4 installation, 1 transport, 2 unpacking – FRITSCH PULVERISETTE 2 User Manual
Page 17: 3 setting up, 4installation

4
Installation
4.1 Transport
WARNING!
Improper lifting can lead to personal injury or property
damage. The machine must only be lifted with suitable
equipment by qualified personnel.
The device is delivered on a transport pallet with a wooden hood or in a
cardboard box.
The guarantee excludes all claims for damage due to improper transport.
4.2 Unpacking
n
Pull out the nails that fasten the hood to the transport pallet. The
hood is the wooden case that has been placed over the transport
pallet.
n
Lift the hood off the transport pallet.
n
If the PULVERISETTE 2 was delivered in a cardboard box, open the
box carefully with a knife.
NOTICE!
Reach under the edge of the housing to carry the device.
n
Compare the contents of the delivery with your order.
n
The scraper and the fastening screw are in a plastic bag in the
grinding chamber. Take them out!
4.3 Setting up
Place the mortar mill on a flat, stable surface. It does not have to be fas-
tened to this surface.
n
Make sure that the mortar mill is easily accessible.
n
Control elements on the back of the device (mains switch) must be
easily accessible.
n
Keep the air outlet free from obstructions on the side ventilation
grate. Risk of overheating!
NOTICE!
Before commissioning, take all loose parts out of the
grinding chamber!
Installation
- 17 -