FRITSCH PULVERISETTE 2 - Manual (Page 13)

DANGER!
Explosion hazard!
– When grinding oxidizable substances, e.g. metals or
coal, there is a risk of spontaneous combustion (dust
explosion) if the share of fine particles exceeds a cer-
tain percentage. When grinding these kinds of sub-
stances, special safety measures must be taken and the
work must be supervised from a specialist.
– The PULVERISETTE 2 is not explosion protected and is
not designed to grind explosive materials.
n Do not remove the information signs.
NOTICE!
Immediately replace damaged or illegible information signs.
n Unauthorised alteration of the PULVERISETTE 2 will void Fritsch's
declaration of conformity to European directives and void the guar-
antee.
n Only use the PULVERISETTE 2 when it is in proper working order, as
intended and in a safety- and hazard-conscious manner adhering to
the operating manual. In particular, immediately rectify any malfunc-
tions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protective equipment
Protective equipment is to be used as intended and may not
be disabled or removed.
All protective equipment is to be regularly checked for
integrity and proper functioning.
A hood safety switch (3) is installed to ensure that grinding is interrupted
when the hood is opened during operation.
The laboratory mortar mill will not start when the hood is
open!
Safety information and use
- 13 -