FRITSCH PULVERISETTE 1, Model I classic line - Manual (Page 14)

Page 12
2. Pull its free end through the two holes at the narrow side of the jaw crusher
and fasten it at the rope in the same way you did first.
3. Do the same with a second rod and rope at the opposite side.
4. With the help of the iron rods 4 support people carry the jaw crusher; the fifth
one prevent it from swinging during transport.
• The jaw crusher must be placed on an even, stable surface. If you wish, you can
also screw it to such a surface or to a ground plate.
4.4 Ambient requirements
• Room temperature must be between 5 - 40°C.
• Height up to 2000m sea level
• Contamination grade 2 in accordance with IEC 664.
4.5 Assembling the funnel (1)
The jaw crusher is not delivered with the filling funnel attached. This must be
installed before starting the jaw crusher for the first time.
1.
Take the funnel (1) and supplied Allen key out of the packaging.
WARNING
Voltage!
• The machine may only be operated indoors.
• The surrounding air must not contain electrically
conductive dusts.
• Maximum relative humidity 80% for temperatures
up to 31
°C, linearly decreasing to 50% relative
humidity at 40
°C.
holes