Installation, Transportation, Unpacking – FRITSCH PULVERISETTE 1, Model I classic line User Manual
Page 13: Setting up, 4 installation, 1 transportation, 2 unpacking, 3 setting up
Page 11
4 Installation
4.1 Transportation
The laboratory jaw crusher is delivered on a transport pallet with a wooden cover.
We recommend using a forklift or pallet truck to transport the packaged instrument.
4.2 Unpacking
• Pull the staples out of the cover with a pulling tool (or pliers).
• Lift it off the transport pallet with the help of a second person.
• Compare the contents of the delivery with your order.
4.3 Setting
up
• The jaw crusher is fixed on the pallet with 4 screws. Unscrew the screws with a
17 mm open-end wrench.
• To carry the jaw crusher you need 5 support people:
1. Fasten a sturdy rope on a ca. 1 m long and 20 mm
∅ iron rod, so that the rope
could not slip.
TIP
5 people are required to carry the jaw crusher.
CAUTION
The weight of the laboratory jaw crusher is
Model I: 177 kg
Model II: 217 kg
CAUTION
The weight of the laboratory jaw crusher is
Model I: 177 kg
Model II: 205 kg