FRITSCH PULVERISETTE 6 classic line - Manual (Page 21)

4.3 Setting up
DANGER!
Do not step under the transport pallet during transport.
CAUTION!
The weight of the planetary mono mill is approx. 67 kg!
CAUTION!
Crushing hazard!
Always lift with 2 persons.
Hold the bottom edge of the housing when lifting the
device.
CAUTION!
Never operate the planetary mono mill while it is standing
on the transport pallet!
n Lift the mill from the transport pallet with at least 2 persons.
n Place the mill on a flat, stable surface. A fastening set is provided to
help stabilise the mill and prevent the mill from shifting during oper-
ation. Screw the two rings diagonally into the surface using the
drilling template. Place the 2 device feet of the mill into the intended
rings.
n Make sure that the planetary mono mill can be easily accessed.
There has to be sufficient space to reach the main switch on the
back side of the device.
n Keep the air outlet on the side ventilation grate free. Risk of over-
heating!
Installation
- 21 -