FRITSCH PULVERISETTE 6 classic line - Manual (Page 16)

3. If POWER SUPPLY is flashing, the device is in setup mode. If
POWER SUPPLY is not flashing, repeat the procedure.
4.
NOTICE!
In the display above the right "-" button (x) in the
TIMER field, there must be a minus sign. That acti-
vates the imbalance switch and prevents a drift of
the device and possible damage to the device
resulting from it.
5. To save and end setup mode, press the STOP button.
2.7 Hazardous points
CAUTION!
– Crushing hazard when closing the hood (3).
– Crushing hazard at the grinding bowl safe-lock ten-
sioning device (5).
– Crushing hazard at the counterweight!
CAUTION!
Risk of splashes!
During wet grinding overpressure may have been formed
by the high temperature.
Wear protective goggles!
Safety information and use
- 16 -