Doepfer A-156 Quantizer - Manual

doepfer System A - 100 Quantizer A-156
1
1. Introduction
Module A-156 (QNT) is a dual control voltage quan-
tizer.
For each of the two sections, the control voltage ap-
plied to the input is converted into the nearest quanti-
zed (i.e. terraced or stepped) voltage, and sent to the
control voltage output. Any voltage between 0 and 10V
is acceptable.
Quantizer 1 provides the usual semitone grid (i.e.
steps of 1/12 V) whereas
quantizer 2 enables more
elaborate grid settings like major or minor scales or
chords. If desired quantizer 1 can use the same grid
settings as quantizer 2.
The trigger inputs allow the synchronization of the
quantizing processes to other events (e.g. envelope
trigger, analog sequencer clock, MIDI clock).
The trigger outputs transmit a trigger pulse whenever
quantization takes place.
The
transpose input is common for both quantizers
and enables the transposition of both output voltages.
CV In
A-156
QNT
CV Out
Trig. In
Trig. Out
CV In
CV Out
Trig. In
Trig. Out
Transpose CV 1+2
Options