Doepfer A-148 Dual Sample&Hold - Manual (Page 5)

doepfer System A - 100 Dual S&H A-148
5
Abb. 3: Glissando
P If you like you can patch the gate signal to
the reset input of the LFO, so that its wa-
veform starts at the beginning for each note.
Instead of an LFO, you can also use the
MIDI-Clock from a MIDI-CV interface. That
will produce glissandi synced to MIDI.
Random filter settings per note
With the patch in Fig. 4, every time a keyboard gate
voltage is received, a new random filter CV is sent
out. For best results, adjust the resonance to a high
setting.
Fig. 4: keyboard gate triggering random filter settings
CV
A-170 S&H VCO
LFO
CV
VCO
S&H A-118
VCF
Gate
Random