Doepfer MTV16 Midi-to-Voltage Interface with 16 Analog Voltage Outputs - Manual (Page 7)

Installation and User's Guide MTV16 Page 7
JP5
JP5 is a 16 pin double row pin header that is used to set the Midi channel and the Midi Control
Change Number that is assigned to the first analog voltage output by means of jumpers.
The numbering is from top to bottom (please refer to sketch on the previous page).
The following table shows the relation between the jumpers 1 ... 4 of JP5 and the resulting Midi
channel:
Jumper
1 2 3 4
Midi
channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
= installed jumper
The following table shows the relation between the jumpers 5 ... 7 of JP5 and the resulting
Control Change Number (jumper 8 is unused):
Jumper Function
5 6 7 8 Control Chance Number for the first output
1 X 0
2 X 16
3 X 32
4 X 48
5 X 64
6 X 80
7 X 96
8 X 112
= installed jumper
The pin header JP4 and the memory circuit IC6 (24C16) have no function so far. They may be
used for future features. IC6 is not assembled.