Doepfer Regelwerk (device no longer available) - Manual (Page 25)

Doepfer Musikelektronik GmbH User manual V1.0 REGELWERK V1.2 ❫ ❴ ❵ ❛
−
A saved Snapshot can be re-loaded by going
to ‘GET SNAPSHOT: (in the Snap Tools
menu) and entering the correct location.
−
n.b.: This is NOT the way to save a
Snapshot: if the LED isn't flashing, the
Snapshot won't be saved.
− (24) ENTER/OK button: for functions
which require confirmation. To show that
confirmation is necessary, the OK button's
LED flashes.
⇒
Buttons (17)-(24) and their relative functions
can be enabled from anywhere in the
REGELWERK 's editing pages. Displaying
and editing Tempo simply overwrites the
current LCD message.
− (25) Alpha dial.
−
To increase a value, turn clockwise. To
decrease a value, turn anti-clockwise.
9.4
Menus in detail
9.4.1 Step Left / decrement
Moves one place to the left; also used in some
menus; and/or decreases a value by one.
9.4.2 Step Right / increment
Moves one place to the right; also used in some
menus; and/or increases a value by one.
9.4.3 Fader Edit
•
For editing the MIDI events associated with
each fader. The fader is selected by pressing
the relevant Fader Select button (above the
faders) .
Sub-menus: (selected by repeatedly
pressing the Fader Edit button)
MidiChannel:
−
Select the MIDI channel for the fader event.
−
Select the type of event:
MidiEvent: shown in abbreviations
NoteOf Note off
NoteEv Note event
PolAft Polyphonic aftertouch
Contrl Controller
PrgChn Program change
MonAft Monophonic aftertouch
PitBen Pitch bend
String String
•
String is a special case, in which a user-
programmed string instead of a simple fader
event is dealt with and output via MIDI.
•
In the String menu, the editing values for
MIDI data bytes 1 and 2 have a special
function, for String control parameters.
•
Besides this, there are also special ('meta')
events.
−
These aren't necessarily related to the MIDI
function of the faders, but can be used, for
instance, to program the
REGELWERK for
real-time control.
−
For instance, various sequencer parameters
can be controlled directly without having to go
through a series of menus or use the alpha-
dial.
MidiEvent: special (meta) events
Extens Extensions
'Place holders' for expansions
TrkPat Track patterns
Pattern selection for sequencer by using faders.
See appendix 10.1
TrkEnd Track end
Selects the last ('reset') step of a sequence track
using the faders (in the range from 1-16)
TrkVel Track velocity
Selects the global Track Velocity for a sequence
by using the faders.
TrkNot Track note
Selects the global base note for a sequence by
using the faders.