Cub Cadet 33" Wide Area - Manual (Page 5)

Chapter 1: Introduction
2
Assembly
Torque specifications may be noted in the part of the
text that covers assembly, they may also be summa-
rized in tables along with special instructions regarding
locking or lubrication. Whichever method is more
appropriate will be used. In many cases, both will be
used so that the manual is handy as a quick-reference
guide as well as a step-by-step procedure guide that
does not require the user to hunt for information.
The level of assembly instructions provided will be
determined by the complexity and of reassembly, and
by the potential for unsafe conditions to arise from mis-
takes made in assembly.
Some instructions may refer to other parts of the man-
ual for subsidiary procedures. This avoids repeating
the same procedure two or three times in the manual.
Model and Serial Numbers
The model and serial number tag can is located in the
back of the mower. See Figure 1.2.
The model number is 12AE764N709.
The model number breaks down as follows:
12.........................self propelled
...A.......................sales level
......E....................type of starter (e = electric)
.........76................deck
.............4N...........engine
..................709.....customer number
The serial number is 11D107B20004.
The serial number breaks down as follows:
1...........................engineering level
.D.........................month of production (D = April)
.....10....................day of the month
.........7..................last digit of the year
...........B................plant it was built in
..............2.............assembly line number
.................0004.....number of unit built
Figure 1.2
Model Number
Serial Number