COP-USA DVRMPEG4-16LAN - Manual (Page 53)

STATIC : Static IP address. Push “Up” “Down” “left” “Right” to move the cursor among the digits and
push ADD or DEC key to modify the IP address. (Fig3.2.28 Setup static IP).
DYNAMIC : Dynamic IP address. Press enter key to visit the menu, the system will display “Please
wait” for a while. Then, the IP address which is assigned by network will be displayed on the screen. If the
DVR failed to connect the network, it will display the information below: (Fig3.2.29 DHCP setting failing)
DHCP SETTING FAIL
CHECK YOUR NETWORK
Attention : If the network DVR is connected to one of the following items, we recommend use Dynamic.
53