COP-USA DVRMPEG4-16LAN - Manual (Page 40)

about two minutes to update.
When the erase, blank check and update are done, system will check the new program which is
written just now.
After the program check is done, the system will restart. So far, USB update is over.
NETWORK UPDATE: The update information is in network, please choose this option
Server IP: The IP address of the network where the firmware is in.
File name: The file name of the firmware.
After filled in the two options above, move cursor to “UPDATE”, press “ENTER” button to begin update
from network. It is the same with USB update that the DVR will restart when the software update completed.
Attention : Please make sure the IP address and the file name are correct.
DEFAULT SETUP: recover the origin configuration setup.
3.2.2 SETUP-LIVE (Fig3.2.9 Setup live)
SEQUENCE DWELL（FULL）：Setup the interval period of single channel switching, there are 9 options for
users, from 0 second to 9 seconds.
SEQUENCE DWELL（QUAD）：Setup the interval period of four-channel switching, there are 9 options for
users, from 0 second to 9 seconds.
40