COP-USA DVRMPEG4-16LAN - Manual (Page 14)

19 pins are in the other row). Make sure pins are plugged into interface exactly.
④ Connect the power supply to HDD
Sketch map of installation
Close the device cover and lock it by screws
Attention : ⒈ Please format the HDD before you using.
⒉ If the user wants to connect the CD/DVD driver to the ATA interface, please choose
the secondary interface, that is near the center of the motherboard. Furthermore, the CD/DVD driver
must be set as master, and the HDD which is connected to same ATA interface with the
CD-RW/DVD-RW must be set as slave.
⒊ Any CD/DVD driver connected to DVR must be set as master, containing USB CD/DVD
driver and IDE CD/DVD driver.
⒋ The CD/DVD driver connected to ATA interface can be viewed in the STATUS or STORAGE
menu of DVR, the CD/DVD driver connected to USB interface can not be viewed in the menu of DVR.
⒌ The CD/DVD driver is optional, depending on the user. If user connects CD/DVD driver to
ATA interface, the max number of HDD that connects to ATA interface is three.
14