COP-USA DVRMPEG4-16LAN - Manual (Page 31)

Basic operation guide
3.1 How to start the DVR
Attention
: Before power on the machine, please make sure the power input (110V/220V) of DVR is
eligible for local power supply, if not, please move the red flipper to the correct input.
If the power indicator light is off, please do as the following:
If the DVR is not connected to the AC source, please connect it. Afterwards the DVR will be powered
immediately. However, if the problem is remaining, please do as the next step.
Switch up the power supply in the back panel, the DVR will start.
The power indicator light is on DVR is powered on, and the word — “Loading……” appears on the screen.
That indicates the DVR is initializing and will enter the live preview soon.
A password is required to access to the menu, you can not enter the next level menu until you type in
correct password. In order to avoid password being spied, the password you input is displayed as “*” while
you are inputting the password.
Only administrator, access the menu with administrator password can setup and modify the configuration,
change administrator password and normal user password.
Normal user can view the live image and playback record by inputting normal user password when
31