COP-USA MC22-SDI - Manual (Page 16)

 Step 3: Input the username and password ( default value are admin ), click ―Ok‖.
3.5.2. Decoder configuration
Enters the parameter Setting three methods：
Meth o d 1 ：
Select the decoder after login, select ―Setting Configuration‖ with right key
Meth o d 2 ：
Select the decoder after login; click the button on the main menu to pop up the remote
configuration window
Meth o d 3 ：
Select the decoder after login, press F5 key
3.5.2.1. Channel setting
Enters the parameter setting and select the Camera Setup, which encoder can connect the decoder in here you
to have to connect.
Step in the Setting Configuration and select the Camera Setup, then you can set which encoder the decoder
could connect.