COP-USA ASH65NV User Manual
Page 5
I Notes for Attention
1.
Read the manual carefully before installing the product.
2. Power Supply: 220V/110V/24V, refer to the sticker on the product.
3. There are sophisticated optical and electronic components inside the product.
Avoid incorrect operation methods such as heavy pressing or strong vibration
during the course of transportation, store and installation otherwise the product
could be damaged.
4. Please do not dismount components inside the product to avoid occurrence of
trouble. There is no part inside the product, which needs repair by customer
himself.
5. Observe all electric safety standard in application and adopt special power supply
attached the product. RS-485 and video signal should keep enough distance with
the high voltage devices and cable during the course of transmission, and take
protection measures such as anti-lightning and surging etc. id necessary.
6. Do not apply the product under the state which exceeds limited temperature,
humidity or specifications of power supply.
7. Do not aim the camera at the sun or very bright object, or to monitor bright and
still object whether the power supply is switched on or off.
8. Do not clean the product with strong or abrasive detergent. Clean out dirt with
dry cloth or mild detergent if dirt is not easily removed.
9. Take care to apply the product to avoid collision or vibration. Improper
application can cause damage.
10. Install the product on the place where it has enough supportability.
11. Wipe dust on the lens with special lens paper.
１