COP-USA ASH65NV - Manual (Page 19)

Operation of the Title of Preset under Edit State
After entering into the edit state, the screen show as the drawing.
You can find current setup is the preset 1 with the title “NO
TITLE”. Move the cursor by PAN LEFT/RIGHT and modify data
by TILT UP/DOWN. Press the button down for 1 second to
accelerate. Press CLOSE button to exit the edit state and save
modification. The title of preset can contain 8 characters such as
0~9, A~Z, +, - and blank. Note: the first letter should be 0~9 or A~Z otherwise it means to delete
the title of the presets and it shall only show “NO.XXX” without the title when preset points.
１５