COP-USA CD55-SDI - Manual (Page 11)

6.OSD - Zones and Privacy Mask 6.OSD - Alarm Setting
ZONE
up to 8 zones
You can define the zones in the whole PT range up
to
with individual label. When the
display setting “Zone Label” is activated, the
label will be displayed on the operation screen.
The definition of the zones should not be
overlapped.
ZONES NUMBER:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR ZONE:
EDIT ZONE LABEL :
Current zone selection
Left limit of the current zone
Right limit of the current zone
Delet the current zone
change the laben of current zone.
ZONES
ZONES NUMBER 1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details Some products may not be available in your country, please contact our distributor for more details
18
ENGLISH
TIME RUNNING
You can set up the timer to start a function like
preset, tour or pattern. Each day can be set 4
action.
AUTO TRACKING
DAY SUN
STATE ON
START TIME 00:00
END TIME
00:00
SENSITIVE LOW
TRACKING-ZOOM OFF
SET LEFT LIMIT
SET RIGHT LIMT
BACK
EXIT
AUTO TRACKING
Auto-Tracking can seach people or object with
high speed and low light performance.
DAY: set current day
STATE: activate AUTO-TRACKING on this day
START TIME: set the time for activation
END TIME: set the time for stop the tracking
SENSITIVE: set the sensitivity for the detection
TRAKING ZOOM: activate auto-zoom
SET LIMIT: set the max. angle for
the tracking.
TIME RUNNING
DAY SUN
TIME CHANNEL 1
START TIME 00:00
END TIME
00:00
RUNNING NONE
BACK
EXIT
Tour
Tour is an auto-run through selected preset
points with definable pause time. A tour can
store up to 32 presets points.
TOUR DWELL:
TOUR PRESETS:
RUN TOUR:
pause time for every stop on the
preset points. selectable between 000-255(s).
press IRIS-OPEN Key on the
keyboard device to enter the preset point
selection. Move the joystick with up and down to
select the preset points by number and save the
setting with IRIS-OPEN key. with IRIS-CLOSE
key you can move to the previous selection. If a
select point has the value 0, all the following
presets points will be ignored.
Starts the tour and exit the OSD
menu.
EDIT TOUR
TOUR DWELL 001
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
RUN
TOUR
BACK
EXIT
Alarms
RESUME: Continue the function on the camera , if it
was setting before the alarms.
RESET DELAY: How long the camera stay in Alarm
position.
ALARM CONTACT: Setting between N/C (normal
Close) or N/O (normal Open).
ALARM NUMBER: curent Alarm number.
ALARM ACTION: Setting for PRESET, SCAN, TOUR,
PAT 1-4, or NONE, if the camere in Alarm position.
ACTIVATE AUX:
ALARM PRIORITY:
Setting Alarm Output, when Alarm is
activate. Select between AUX1, AUX2 (not connected)
or BOTH.
define the priority of the alarm input.
ARM SETTING: define the operation timer of the alarm
ALARM SETTING
ALARM NUMBER 001
ACTION TOUR
ACTIVATE AUX AUX1
ALARM PRIORITY LOW
BACK
EXIT
ALARM
WINDOW BLANKING
WINDOW NUMBER 01
EDIT WINDOW
ENABLE WINDOW OFF
CLEAR WINDOW
BACK
EXIT
Privacy Mask ( Window Blanking)
Privacy Mask is used to protect the privacy area not to be
displayed once the camera is pointed on, such asu
levatory area or the operation desk of an ATM machine. It
might be required for video surveillance application
depends on the local law regulation. The HSD Serie
supports up to 24 private masks. (depends on installed
camera module, please contact your local sales
representative for more information)
WINDOW NUMBER:
EDIT WINDOW:
ENABLE WINDOW:
CLEAR WINDOW:
Mask number
Edit position of the mask by joystick of
the keyboard. presse IRIS-OPEN to save.
shows the mask on screen OFF
Delete the mask
ALARMS
Resume OFF
SEQUENCE 001
RESET DELEY 030
ALARM CONTACT N/O
ALARM SETTING
ARM SETTING
BACK
EXIT
ARM SETTING
DAY SUN
ARM STATE OFF
ARM TIME N/A
UNARM TIME N/A
BACK
EXIT