COP-USA CM1-IPMP (CM-IPMP) - Manual (Page 9)

Cloud Camera user manual
2. Wi-Fi: WIFI: You Can use either the (WPS) connection
or manually login to the router and look for the IPCAM IP.
Power the unit ON and wait until the Unit stops its self test movement
and the green light is flashing on STATE2 indicator.
1..Press the FN button for 3 seconds, the button is located
in the back of the unit right above the audio jack.
2..Press the WPS Button from the router within 60seconds.
Please look at the user’s manual of the Router if you can’t
locate the button.
3..In some routers you might have to login and proceed
from the router’s WIFI connection wizard.
4..If there is no WPS option in your router, please login and look for wireless
IP address on the network.
Look for one that is new to the Network and type that IP using the Internet Browser
•.Note: The Router’s DHCP server function must be enabled.
three seconds under the rear of the machine, then STA2
FN button
The second step: This Following step is to create an Account for your own central management
service.
1..Go to http://www.mipcm.com and create an account typing your new username and password.
2..Please keep these two information safe.
Mobile client software to
download
language option The registered
account user
Input ID number or
registered account
Enter Password
9