COP-USA CM1-IPMP (CM-IPMP) - Manual (Page 32)

Cloud Camera user manual
detailed information, please refer to the relevant sections of the cameras installed in
the router backend.
Ensure that the network camera does not conflict with any Web server running on
gs
external access from your local LAN network cameras.
4. Why the image on some of the vertical white line?
e
the form of an image presented to
t
.
urred.
cus, the
ted until the image is most clear.
ve the image quality?
colors.16 or 256 colors
facts, it seems the quality will be poor.
igured correctly. Configuration through
arameters to
r
Explorer to see the
lso
g.
owser, in order to watch the video sent by the network camera.
your network.
The default router setting might be the problem. Make sure that the router settin
configured to allow
There may be a CMOS sensor due to exposure to light (such as direct exposure to
sunlight or a halogen light) and overload result. The CMOS sensor is located in th
rear of the lens, its role is the measurement light signal and converts it to a digital
format so that the computer will digital format in
the user. CMOS sensor is a long time in the bright light , the network camera canno
be immediately transferred to a dark area, so as not to damage the CMOS sensor.
5. The camera blurred image, how to solve?
If the network camera work where light is dim, the video image may become bl
Another possibility is that the camera lens and CMOS sensor not good fo
camera aligned 5 meters away from the object, turn the lens slowly by hand
repeatedly adjus
6. The image quality is poor, how to impro
Determine your computer's display properties set at least six
makes the image appear jitter arti
Network Camera image display is not conf
the Web Management Web video interface, you can adjust the p
improve the image quality, these parameters include: brightness, contrast, and colo
saturation.
7. Why no images on the Web browser?
The ActiveX might not enabled. If you are through Internet
image, make sure to enable ActiveX in the Internet Options menu. You may a
need to modify the browser's security settings to allow installation of ActiveX plu
If you are using Internet Explorer version is less than 7.0, you need to upgrade to a
Web br
8. Troubleshooting, LED status indication:
Indicator Indicator f lashing Status
frequency
POWER (red light) Long bright normal Power supply
STATE1 (red light)
32