COP-USA CM1-IPMP (CM-IPMP) - Manual (Page 8)

Cloud Camera user manual
POWER LED should be red.
Connect an external alarm interface and an
external audio
E
Audio IN: MIC and Audio OUT: External Speaker or Headphone xternal audio input / output interface:
The first step to configure the network connection:
1.WIRED LAN IPCAM connect to the power
supply and Network Cable. The Power indicator will lid in
steady red light.
STATE2 indicator will also turn red,but
Wait 20 seconds, and the led will turn green and flash every 3 seconds
A
Camera Installation Wizard
STATE2
indicator light
8