Wireless network – COP-USA CM1-IPMP (CM-IPMP) User Manual
Page 21

Cloud Camera user manual
4.2. Wireless Network:
NIC choose a wireless network.
Startup Status: Displays the current wireless network, enable /
disable.
Wireless mode: hot / terminal
A. Hot spot: as the default it searchs equipment, network
cameras, wireless hot spot, wireless devices through wireless
search, Point-to-point connection to the camera.
DHCP: Dynamic Host Configuration Protocol for wireless hotspots, starting address
to the end the address and gateway.
B. Terminal: As search equipment.
Connection Status: Displays the status of the wireless
network.
Select Network: Wireless will automatically search for the
cameras surrounding the wireless network terminal in the
drop-down list, select the wireless network terminal.
network
equipment.
Click the connect button to connect the selected wireless
o save your changes.
Mac address: displays the current wireless network Mac
t):
teway / subnet mask information.
era.
eck
lly get the DNS Information from the router where is connected to.
ur changes.
Password: Enter the password for the wireless
Click Apply t
address.
Automatically obtain an IP address (cameras defaul
select camera
Machine automatically get connected to the router and it is
automatically assigned to
IP address / ga
Use the following IP address: Check the user manual
allocation
One IP address / gateway / subnet mask to the cam
Dns server address automatically exercised: After ch
Automatica
ed, camera will
Following dns server addresses: After checked, user
Manually assign DNS to the camera.
Click Apply to save yo
21