COP-USA CD260XIRICR-WDR - Manual (Page 5)

8. EFFECTS
DZOOM MODE
IMAGE FREEZE
D‐EFFECT
CONTRAST
SHARPNESS
COLOR ADJUST
INITIAL SET
PREVIOUS
9. SPECIAL
MOTION DET. ON/OFF
PRIVACY MASK ON/OFF
LANGUAGE ENGLISH / KOREAN / RUSSIAN / SPANISH / FRENCH
STABILIZER ON/OFF
L/L SYNC INT
MONITOR TYPE CRT / LCD
DZOOM MODE: (ON/OFF)
ON:
ZOOM (X1.00~X6.13)
Select the Digital zoom magnification
and move through the screen using
these following features DZOOM PAN
and DZOOM TILT
DZOOM PAN (‐100~+100)
DZOOM TILT(‐100~+100)
PREVIOUS IMAGE FREEZE:
freezes the image.Note that when the Image Freeze is
ON ,Dzoom mode will be OFF.
D‐EFFECT:(OFF/V‐FLIP/MIRROR/ROTATE)
Select one of these features depending on how the
camera will be mounted.
CONTRAST:
Adjusts the Contrast (0~100)
COLOR ADJUST:
COLOR:(ON/OFF)
COLOR LEVEL (0~200)
COLOR HUE(‐180~+180)
RED GAIN(‐100~100)
BLUE GAIN(‐100~100)
PREVIOUS
INITIAL SET
RESET TO FACTORY DEFAULT SETTINGS
PRIVACY MASK: (ON/OFF)
MASK NUMBER (MASK 1~MASK8)
MASK COLOR (GRAY / WHITE / RED/GREEN /
BLUE/YELLOW/BLACK)
WIDTH :
Enlarge or decrease the horizontal size of the L/L SYNC
The Line‐Lock (L/L) feature allows the camera
to synchronize its
frame rate to the power line phase. The
function is only available
when the camera is operated by AC power. It
MONITOR TYPE CRT / LCD
FACTORY RESET
COMM SET
N/A
PREVIOUS
10. EXIT
MOTION DET:
The camera allows up to 8
independently‐defined zones to be
monitored for motion.
You can control
ON/OFF/WIDTH/HEIGHT/MOVE
X/MOVE Y of
each zone independently to define
if the motion detection
mechanism would be active at the
zone or not, and to set the
zone location in the image and its
sensitivity.
MOTION DET:(CONT.)
When Motion det feature is ON this following
menu will show up
ZONE NUMBER (ZONE1 ~ZONE8)
ZONE STATE (ON/OFF)
WIDTH (16~90)
HEIGHT (12~54)
MOVE X (8~92)
moves a horizontal position of the zone
MOVE Y (26~74)
Moves vertical position of the zone
SENSITIVITY (0~100)
You can set different sensitivity level to each
zone. The more
sensitive the detection is, it would detect even
smaller motion, but it might cause more false
alarms.
INITIAL SET
Back to Factory Default
g
mask.
HEIGHT:
Enlarge or decrease the vertical size of the mask.
MOVE X
Moves horizontal position of the mask.
MOVE Y
Moves vertical position of the mask.
INITIAL SET
Back to factory default
PREVIOUS
Return to previous menu
STABILIZER
This function helps to stabilize the picture and
reduce the
image shake when the camera physically moves.
This
function is useful especially when using a high‐
zoom lens,
where every small movement of the camera
results in shake
of the image.
allows the reduction
of the fluorescent lights color rolling effect.
When using 12v DC
power, the camera is automatically set to
internal (INT) synchronization
MONITOR TYPE
You can choose the type of screen you are
working with between
CRT/LCD.mode.
FACTORY RESET
Restore all settings to factory default settings.
COMM SET N/A