COP-USA CD260XIRICR-WDR - Manual

CD260XIRICR‐WDR
User's Manual
These buttons are located at the cable right next to
the BNC and DC power connectors.
Press the center Button to Enter the OSD Menu.
Move Up or Down to move thru the menu options and left or right to
change values on the menu,
Press the center button again to get into sub menus.
Always remember to save before you exit.
When you Highlight the Exit Option, press the right button to either
TOP, RET or ENT.
1.CAM NAME
2. LENS
3. EXPOSURE
4. DAY/NIGHT
5. WDR/BLC/ECLPS
6. WHITE BAL
7. 3D‐DNR
8. EFFECTS
9. SPECIAL
10.EXIT
Packing List:
‐ 1 Arlen Screwdriver
‐ 1 mini flat screwdrive
‐ 1 kit with screws and anchors
‐ 1 Specification Sheet
‐ 1 mini flat screwdrive
‐ 1 DC connector