Cypress 1140 - Manual (Page 21)

Viewing your login type
The terminal can operate in one of two login types:
• Unique—the ability to join a session with an m6350 Softclient is not
enabled.
• Joint—the ability to operate in a joint session with an m6350 Softclient
is enabled.
Step Action
1 From the main menu, open the User menu.
2 From the User menu, select and open Login Type.
The Unique screen appears. If Unique is enabled, Ok appears
above the far left soft key.
3 Press the down navigation key to view the Joint screen.
If Joint is enabled, Ok appears above the far left soft key.
—End—
Viewing, disabling, or enabling the auto login feature
Any maintenance activity, for example a firmware upgrade, forces a log off
from the network. If you enable auto login, you are automatically logged on
after the phone is available again.
Prerequisites
You must have permission to edit the auto login feature. If you have
permission, a check mark appears next to Enabled when the screen
appears.
Step Action
1 From the main menu, open the User menu.
2 From the User menu, select and open Auto Login.
The Auto Login screen appears displaying your Auto Login profile.
3 If you have permission to edit this feature, press Ok .
The Enabled screen appears. A check mark appears if the feature
is enabled.
4 Perform one of these actions:
• To enable Auto Login, select Enable. (recommended)
• To disable Auto Login, select Disable.
5 Press Ok .
—End—
Using the User M enu Page 20