Cypress 1140 - Manual (Page 13)

While on an A ctive C all
Using call hold
Step Action
1 To put the call on hold, press the hold key.
The call is suspended. On the display, an indicator flashes beside
the line on which the call is held.
2 To retreive the call, p ress t he k ey b eside t he fl ashing i ndicator i n t he d isplay.
—End—
Transferring a call
Step Action
1 During a call, press the key to which the transfer feature is assigned.
The call is put on hold and a dial tone sounds. On the display, an
indicator flashes beside the line on which the call is held.
2 Use the dialpad to enter the number to which to transfer the call.
3 When that number rings or is answered, press the transfer key again.
The call is transferred.
—End—
Using conference call
If you have the multimedia seat, you can add up to 30 calls to a conference.
Step Action
1 During a call, press the feature key assigned as the conference key.
The call is put on hold and a dial tone sounds. On the display, an
indicator flashes beside the line on which the call is held.
2 Dial the number of the person you want to add to the call.
At this time, you can talk privately to the person you are adding, to
announce the conference.
3 Press the conference key again to merge the calls.
4 Repeat steps 2 and 3, to add more calls to the conference.
5 If you make a mistake dialing, or a party does not want to be included
in the conference, press the extension key of the conference call
to reconnect to the conference.
6 If you hang up, the other parties will stay connected until they hang up.
—End—
Page 12