Enabling or disabling autoscroll, Labeling a feature key, Key you selected in step 2 is assigned to a – Cypress 1140 User Manual
Page 16

Using the
Features Menu
Enabling or disabling autoscroll
If autoscroll is enabled, the IP Phone automatically directs you to the screen
for the active feature. For example, if your secondary Directory Number
(DN) is configured on screen two, and you receive a call to that number, the
feature screens scroll to page two. You can answer the call immediately
without searching for the screen.
Step
Action
1
From the main menu,
highlight
the
Feature
menu
and press Ok
.
2
S
elect
a Feature and press OK. Highlight Assign and press Ok.
.
3
From the Assign menu, select AutoScroll.
Press Ok.
4
Perfor
m
one
o
f
t
hese
a
ctions:
•
To enable autoscroll, select Enable.
(Recommended)
•
To disable autoscroll, select Disable.
6
Press
Ok.
—End—
Labeling a feature key
Step
Action
1
From the main menu, open the
Feature
menu.
Select a menu item.
2
From the Feature menu, select and open Label.
3
Press Clear to delete the current label
if necessary.
4
Use the dialpad to enter the new label.
5
To correct the label, press Bkspc.
6
When you have correctly entered the new label, press
Ok.
—End—
Page 15