ChemoMetec SP-100 - Manual (Page 41)

6 Troubleshooting
31
SemenView is activated. If the “QUIT”-button does not respond (after only few seconds),
you can close SemenView down using the Windows Task Manager. For instructions on
the use of Windows Task Manager please refer to the documentation supplied with
Windows.
Low resources on the PC running SemenView can cause the result field to show the
following message "Not SP-100". You can check your resources on the PC using the
Windows Task Manager. Please show caution when performing the following or contact
your local PC administrator. The Windows Task Manager is activated in the following
way
7 :
Press the 3 keys "Ctrl" + "Alt" + "Delete" and the same time, then press the Task
Manager button, hit Performance and the following appears:
Figure 43 Windows Task Manager – Performance when running SemenView
Figure 43 shows the Windows Task Manager. During normal operation of SemenView the
CPU usage will typically be less than 30% however it can peak to 90%, when a new file
is received and to 80% when another file from the file list is selected.
7 This applies only to Windows 2000.