ChemoMetec SP-100 - Manual (Page 23)

3 The structure of SemenView TM
13
3 The structure of SemenView T M
NucleoView is operated through a number of tabs. The different tabs are selected by
clicking on the corresponding tab. The tabs are shown in figure 17.
Figure 17 The three tabs of SemenView.
The default startup screen is the Analysis tab. For detailed descriptions of the different
tabs see the following chapters. An overview of the three different tabs is given below.
3.1 Analysis tab
This is where data, from the CM file received, from the NucleoCounter SP-100 is
presented. The presented data are:
Cells/ml Sample The actual result from the NucleoCounter SP-100 analysis
DF The dilution factor used for the analysis
Sample ID The sample identification if entered
Setup The measurement Setup according to the selected species of
animal is shown here. Boar, Bull etc.
Viability The percentage of viable cells
Calculate Viability Calculate Viability check-butten enables the calculation of
Viability.
Image data The fluorescence image with the "starry sky" made by the
Semen cell nuclei.