ChemoMetec SP-100 User Manual
Page 27
4 Analysis tab
17
Figure 21 Dilution factor (DF), Sample ID and Setup
4.4
Sample ID – Sample identification
During analysis on the NucleoCounter SP-100 a numerical Sample ID can be entered.
This number will if entered be displayed in the field below the Dilution Factor.
4.5
Setup – Measurement setup
The NucleoCounter SP-100 provides analysis of different species of animal. Once a
Measurement setup is activated it will be shown in the "Setup" field. E.g. Boar, Bull etc.
4.6 Folder
selection.
Each day SemenView is launched, a new session (folder) is created. The folder’s name is
the date of the session (yymmdd). It is possible to browse sessions created at an earlier
date using the Folder button (Figure 22)
Figure 22 The Folder button and selected folder.
When a measurement is performed and data is transferred to the computer, a file
containing the measurement data is created. The file is shown in the file list, and the
file name consists of the date of analysis and a running number as “yymmdd – nnn",
see figure 23. The file list will also contain the actual result from the analysis.