Checkline TMT-425 - Manual (Page 6)

 Electromatic Equipment Co., Inc.
-8-
Print data (logs):
To print the stored logs, connect the supplied printer cable with the printer. Open the
protective cover at the TMT-425 carefully. First insert
the plug, which is closer to the plastic housing, into
the gauge. Then turn the gauge on.
Only then insert the other plug of the cable into the
printer and turn him on by the button. The green
light should blink. If this is not the case, change the
batteries and try again.
Press the
button until the main menu is opened.
Select the item “Print logs” and confirm with . Now
you can choose whether all stored values or only the
last values (logs) should be printed.
 Electromatic Equipment Co., Inc.
-5-
5.0 MENU LEVEL OVERVIEW
Next calibration curve
Previous calibration curve
Switch off
Previous log
New log
Switch off
Type selection menu
Store menu
Main menu
Switch lower
Switch upper
Open this menu / Enter
Keypad symbols
Measuring window:
Rolling Menu
Power ON / OFF
Switch upper
Switch lower
Save
Hold
Watch saved
data
Add supplier’s
data
Menu:
Enter
Switch upper
Switch lower
Back
Enter numbers
Enter letters
Next or right
Left
Yes
No
Shift
OK
Overview main menu
Data Memory
Manual logs
Delete logs
Print logs
Last row
All logs
Delete logs
Send logs
Manual logs
Delete logs
Options
Date/Time
Datealog Time
Language
Unlock
° C / °F
Userlevel
Lighting time
Auto off time
Setting
Materialcalib.
Password
Reset
Status