Checkline ESM - Manual (Page 2)

Models ESM & ES30
1
Thanks!
Thank you for purchasing a Mark-10 Series ES Force Measurement
Test Stand. We are confident that you will get many years of great
service from this product.
Mark-10 test stands are ruggedly built for many years of service in
laboratory and industrial environments.
This User’s Guide provides unpacking, setup, and operator instructions
for the Model ES30 and Model ESM Force Measurement Test Stands.
Dimensions and specifications are also provided. For additional infor-
mation or answers to your questions, our technical support and engi-
neering teams are eager to help you.
Thank you again for your purchase and happy testing!
TABLE OF CONTENTS
LIST OF INCLUDED ITEMS ....................................................... 2
UNPACKING AND SETTING UP ............................................... 2
MODEL ESM .............................................................................. 3
Safety Tips ............................................................................ 3
Setup .................................................................................... 3
Operation .............................................................................. 4
Specifications ....................................................................... 5
Dimensions ........................................................................... 6
MODEL ES30 ............................................................................. 7
Operation .............................................................................. 7
Dimensions ........................................................................... 8
Specifications ....................................................................... 8
OTHER TEST STANDS BY MARK-10 ....................................... 9
FORCE GAUGES BY MARK-10 .............................................. 10
WARRANTY ............................................................................. 10
10
User’s Guide
Force Gauges Series MG
•
Low cost and small size
•
Aluminum housing is reversible for hand-held use or test stand
mounting
•
Peak memory for tensile and compressive loads
•
Selectable units of measurement programmable auto shutoff
•
Push-button calibration
•
IPM - Intelligent Power Management system for reliable opera-
tion
WARRANTY
Mark-10 Corporation expressly warrants to its buyer for three (3) years from the date
of delivery that the goods sold are free from defects in workmanship and materials.
Mark-10 Corporation will, at its option, repair or replace or refund the purchase price
of goods found to be defective. This remedy shall be the buyer’s sole and exclusive
remedy. Any modification, abuse, exposure to corrosive environment or use other
than intended will void this warranty. This warranty is in lieu of all other warranties,
including implied warranties of merchantability and fitness for an intended purpose.
In no event shall Mark-10 Corporation be liable for any incidental and consequential
damages in connection with goods sold or any part thereof.
FORCE GAUGES BY MARK-10
Capacities from 0.25 lb (1 N) to 500 lb (2500 N)
Force Gauges Series EG
•
Reversible aluminum housing for hand-held use or stand
mounting
•
Three units of measurement: lb, kg, N
•
Programmable initial status of units and mode of operation
•
Automatic peak memory
•
Push-button calibration
•
Battery or AC operation with programmable automatic shutoff
•
Permanent configuration memory
•
Optional RS-232, Mitutoyo and analog outputs
Force Gauges Series BG (in addition to EG features)
•
RS-232, Mitutoyo and analog outputs
•
GCL – Gauge Control Language for full control of all functions
•
Automatic timed output on RS-232
•
Dual set points with outputs
•
General purpose I/O for external device control
•
Programmable analog and digital filters
•
Averaging mode for obtaining average force readings over
time