Cannon Instrument SimpleVIS - Manual (Page 8)

Dry Cycle
Press the Dry button on the display wash screen to start the dry run cycle. The
display will show the time remaining in the dry cycle.
When the dry cycle time ends, the pump will turn off and the instrument will
return to the Warm up Screen for a period of 60 seconds. The instrument
will then be ready to run a new sample measurement at the leisure of the
operator.
Run Status Indicator
Run Status Indicator lamps on front of the instrument allow users to see
from a distance whether the instrument is ready to accept a sample. When
the instrument is ready to accept a sample, the lamps will be lit. During the
viscosity measurement, the indicator lamps will be off. The indicator lamps
will blink at the conclusion of a new test or if an instrument error occurs.
Running a Test
Dry Screen Wash Screen
8