Basic information, Returning your instrument to cannon, Instrument co – Cannon Instrument SimpleVIS User Manual
Page 14

14
vacuum line by approximately 2 inches.
4. Connect the other ends of both pieces of
tubing as indicated in the photo image.
Select Target Temperature
1. Press
the
on switch on the AC/DC
adapter. The Warm up Screen will
display a “PLEASE WAIT” message
2. Select the temperature by tapping the
temperature directly under the “Seeking
Target Temperature” caption field in the
Warm Up Screen three times within
two seconds. This will cause the display to
switch to the Set Temperature Screen.
3. Select the desired temperature then press
the save button.
Returning your instrument to Cannon
®
Instrument Co.
1. Please
contact
CANNON
®
Instrument Company to receive a Return
Authorization (RA) number from our Technical Service Department.
2. Download our Instrument Repair/Calibration Return Form and fill in all
required information on the form
3. Carefully package and ship your instrument with all required information
in the case supplied with the instrument. The RA number needs to be
clearly marked on the package label. Ship to the following address:
Cannon Instrument Company
ATTN: Return Authorization Number: ________
2139 High Tech Road
State College, PA 16803 USA
When returning your instrument please include the following information:
The name and telephone number of the person in your company to contact
regarding the instrument.
Basic Information