Cannon Instrument SimpleVIS - Manual (Page 5)

GETTING STARTED
Press the on switch on the AC/DC
adapter. The Warm up Screen will
display a “PLEASE WAIT” message.
During this time, the instrument will
seek the preset target temperature
(40 or 100°C) and when reached, the
instrument will enter an equilibration
period. The equilibration period is 180
seconds.
Note: Refer to the Basic Information
section under Select Target
Temperature for instructions on how
to select the target temperature.
Once the temperature has equilibrated
and the instrument is ready for
measurement, the run status indicator
lamps on front of instrument will
illuminate and the user will be prompted
to inject the sample on the Ready to
Test Screen.
Check the volume of the solvent
container at the beginning of every
work shift to avoid inadequate
washing during testing.
Check the volume of the Waste Bottle
frequently to avoid spillage/overfl ow. Empty the waste bottle when the
volume reaches the 400 mL line marked on the bottle. Refer to the Basic
Maintenance portion of this guide for more information.
Running a Test
Ready to Test Screen
Warm up Screen
Running a Test
5