Cannon Instrument SimpleVIS - Manual (Page 3)

SAFETY CAUTIONS
Please observe the following safety procedures
and notices for proper operation of the SimpleVIS ® Viscometer.
• Make sure that you read and understand all operating instructions and safety
precautions listed in this manual before installing or operating your unit. If you have
questions regarding instrument operation or documentation, contact CANNON ®
Instrument Company.
• Do not deviate from the installation, operation or maintenance procedures
described in this guide. Improper use of the SimpleVIS ® Viscometer may result in a
hazardous situation and may void the manufacturer’s warranty.
• Handle and transport the unit with care. Sudden jolts or impacts may cause
damage to components.
• Do not place the SimpleVIS ® Viscometer on an unstable cart or stand. The
SimpleVIS ® Viscometer should be placed on a level table or bench.
• Never operate damaged or leaking equipment.
• Unless procedures specify otherwise, always turn off the unit and disconnect the
mains cable from the power source before performing service or maintenance
procedures, or before moving the unit.
• Never operate the equipment with damaged mains power cables.
• Refer all service and repairs to CANNON
® Authorized Service Personnel.
CAUTION
In addition to the cautionary statements listed above, additional cautions may be
posted in the manual. These cautions, identified by the symbol at the left indicate
important operational procedures. Read and follow these important instructions.
Protective Conductor
The Protective Conductor Terminal symbol is used to indicate required ground
connections for your instrument electrical supply.
WARNING
When supplying power to this instrument, ensure that the protective ground (earth)
terminals of the instrument are connected to the protective conductor of the
(supplied) line (MAINS) power cord. Use only the manufacturer-supplied power
cord. The main plug for the power cord should only be inserted in a socket outlet
(receptacle) provided with a protective ground (earth) contact. Do not use an
extension cord (power cable) without a protective conductor (grounding).
3