Cannon Instrument miniAV-X - Manual (Page 59)

53
CANNON ® miniAV-X Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.0b— March, 2012; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
Selecting sample run required and maximum determination settings
Select the number of Required determinations by clicking on the
spin controls (values from 1 to 4 are acceptable). In the same manner,
select the
Maximum number of determinations which can be run for the
tube samples (values from 1 to 20 are acceptable).
NOTES VISCPRO determines the sample flow time by averaging the values of
the sample runs which correspond to the chosen criteria.
If the Always perform maximum determinations radio button is selected,
the last flow times will be used for the viscosity determination.
When you have completed the configuration and saved the current
settings, you may wish to permanently store the settings using the Save
Instrument and Tray Settings.
Tray Settings: Wash
Use the Tray Settings: Wash window to determine wash settings. For
multi-tube units, different wash settings may be selected for each tube
individually.