BUCHI NIRFlex N-500 User Manual
Page 50
5 Putting into operation
50
NIRFlex N-500 Operation Manual, Version F
5 .6
Installing the cover of the NIRFlex Solids Transmittance
b
a
Insert the tilted cover a and hook its left hinge onto to the bushing pin (hinge counterpart) at the rear
left hand side of the measuring cell. Tilt the cover back into a straight position b.
c
Keep the right hinge of the cover in a matching position with the bushing screw. Fasten the screw c
with a few turns (the screwdriver is part of the scope of delivery). Open and close the cover several
times to verify the correct installation.
NOTICE
Risk of mechanical damage at the hinges of the top cover.
Keep the top cover closed when the measuring cell is not installed
•
Carefully open and close the top cover to avoid mechanical stress at the hinges
•