BUCHI Extraction Unit E-816 SOX - Manual (Page 32)

6 Operation
32 E-812/816 Soxhlet Operation Manual, Version B
Fig. 6.8: Rinse step
Set the rinse time by means of the selection knob and press OK to confirm it.
NOTE
We recommend to use the default heater setting of 100% for general extraction purposes.
Press Next to continue with the drying step.
Fig. 6.9: Drying step
Set the drying time by means of the selection knob and press OK to confirm it.
NOTE
We recommend to use the default heater setting of 100% for general extraction purposes.
Your method is now created. Press End to get back to the menu.