BUCHI Vacuum Controller V-855 - Manual (Page 17)

6 Operation
17 Distillation Record 1.2 Operation Manual
6 .1 .6 “Settings” tree view
General
Basic program settings such as language, file paths, comments
and information about the instrument/setup can be changed to
new default values here.
Charts
Chart view settings can be changed here, e.g. custom scaling of
the axis and colors.
"General" submenus
1 st submenu 2 nd submenu
"Notes" "Info" ➡ Set default text for new records (newly generated records are
filled out with default values).
"Device Configuration" ➡ Set default values for connected instruments.
"Application" "Folder Settings" ➡ Set default file paths.
"Apply Auto-Save" ➡ Enable or disable auto-save functionality. If auto-save is enabled,
saving interval can be adjusted.
"Units" ➡ Set default temperature and pressure units or activate checkbox
to use vacuum controller pressure unit (recommended).
"Language" ➡ Set user interface language.
"Device" "Device settings" ➡ Choose the devices according to your actual setup and the
recording interval (data acquisition per time).
NOTE
The recording interval automatically changes to 5 seconds when the recording process takes longer
than 8 hours.
"Charts" submenus
1 st submenu 2 nd submenu
"X-Axis" "Fixed Scale" ➡ Set time line resolution for fixed time scale.
"Variable Scale" ➡ Set initial time line resolution for variable time scale.
Use "Apply Fixed Scale" to toggle between fixed and vari-
able scale setting. "Redesign Point" and "Redesign Size"
define the time scale shifting and resolution behavior.