Polymath – Analogue Solutions Polymath User Manual
Page 38
Polymath
38
Circuits – Main PANEL | Analogue Solutions
This is particularly useful if you want the SEQUENCER to run at different clock divisions
from the ARPEGGIATOR. This was the SEQUENCER can be used to transpose
Polymath/the Arpeggio every bar, every 2 bars, or every 4 bars.
ARP
The clock source will be taken from the ARP socket. That way both the SEQUENCER and
ARPEGGIATOR will be running together from a common clock.
Step Sliders
It is an 8 step sequencer, so there are 8 sliders! Voltage range is approximately 0-5V.
Step LEDs
These light up in turn to show the active step.
STEP ON push button