Analogue Solutions Polymath - Manual (Page 20)

Polymath
20 Circuits – Main PANEL | Analogue Solutions
This four position switch selects the type of filter used, and the filtered audio of the selected
filter type is sent to the VCF audio out socket.
LP – low pass
BP – band pass
HP – high pass
Notch
Each of these filters also has their own audio output socket, independent of the switch
position. See below.
LP / BP / HP / NOTCH sockets
These are audio outputs direct from each filter type.
VCF socket
This is the filtered audio from the filter selected by the MODE switch. Normally patch this to
the socket just to the right, which is the VCA Audio input socket.
VCA Audio In socket