Analogue Solutions Polymath - Manual (Page 19)

Polymath
Analogue Solutions | Circuits – Main PANEL 19
This controls the input level of the audio going into the filter through the AUDIO sockets.
AUDIO socket
This is the audio input to the filter. Typically this would be patched to the Mixer’s audio OUT
socket.
CUT-OFF
This sets the filter cut-off frequency. It is used to change the tonal characteristics of the
audio going through the filter.
RESONANCE
This control increases feedback at the filter cut-off frequency. What some people like the
technically refer to as squigyness.
MODE rotary switch