Polymath – Analogue Solutions Polymath User Manual
Page 36
Polymath
36
Circuits – Main PANEL | Analogue Solutions
A mono headphone pre-amp. Normally you would patch the output from the VCA to the
headphone amp.
Although this is a monosynth (that is monoaurial!), you must use stereo headphones, that is
use a stereo jack, since a mono jack will cut out the signal -if mono headphones exist
The top minijack is the input. Feed the output of the VCA into here. The bottom jack is for
your stereo headphones.
ADAPTOR
This is used to convert a mini-jack to a big jack (either way!)
Normally used when you want to send, or receive, audio from/to and external device such as
a mixing desk.