Rear panel connections – Analogue Solutions Nyborg User Manual
Page 21
Rear Panel Connections
F1 IN
This is an audio input socket to feed audio signals directly into mixer.
F2 IN
This is asecond audio input socket to feed audio signals directly into mixer.
OUT
This is the main audio output from Nyborg. It is the signal output from the VCA, post
Volume control.
MIDI IN
Plug your MIDI cable in here to all another MIDI device to control the Nyborg.
MIDI THRU
The MIDI data coming into the In socket is copied to the Thru socket. This is so you
can control additional devices from your MIDI controller without the need of a MIDI
thru box. The Thru socket will not function when in Poly mode.