Setting midi channel – Analogue Solutions Nyborg User Manual
Page 20
Setting Midi Channel
FUNC(tion) Push Button
This button is used to set the MIDI channel and CV2 controller.
Works best if you plug a MIDI keyboard direct to program rather than via a DAW.
TO CHANGE THE MIDI CHANNEL AND CV2 CONTROLLER;
•
Press and hold the FUNC button,
•
Press a MIDI key or move a MIDI controller.
•
Release the key/controller. Then release the FUNC button.
•
The synth will set its MIDI receive channel to the same channel of the MIDI
message that was received.
•
CV2 will be set to Velocity if you used a MIDI key or to the same controller
number of the controller that was moved.
If it doesn’t work first time, try again! Then, still if not, try another keyboard. Also
check your cables are not faulty.